Major update v4.0.27 to v4.0.28 

update_4.0.27_to_4.0.28.zip

setup K-Rea v.4.0.28

  • Update calculation kernel: fix combination handling

Major update v4.0.26 to v4.0.27

update_4.0.26_to_4.0.27.zip

setup K-Rea v.4.0.27

  • Improvement of the search for the z0 and zC level in LEM checks
  • Correction of moment representation

Major update v4.0.25 to v4.0.26

krea_upd_v.4.0.25_to_v.4.0.26.zip

setup K-Rea v.4.0.26

  • Splash screen updated
  • Load’s nature is now printed when printing ULS data

Major update v4.0.24 to v4.0.25

krea_upd_v.4.0.24_to_v.4.0.25.zip

setup K-Rea v.4.0.25

  • Update license manager
  • Moment drawing updated on model chart
  • Export documentation updated

Major update v4.0.22 to v4.0.24

krea_upd_v.4.0.22_to_v.4.0.24.zip

setup K-Rea v.4.0.24

  • Added trial licenses
  • Update of the text export
  • Added calculation via command line
  • Corrected display bug

Major update v4.0.20 to v4.0.22

krea_upd_v.4.0.20_to_v.4.0.22.zip

setup K-Rea v.4.0.22

  • Improvement of the results envelopes at the ELU MEL
  • Update of the calculation engine
  • Correction of various cosmetic bugs
  • Update of the examples
  • Update of the license system
  • Digital signature

 

Major update v4.0.11 to v4.0.20

krea_upd_v.4.0.11_to_v.4.0.20.zip

setup K-Rea v.4.0.20

Version 4.0.20

  • Update of the license management system
  • Calculation kernel update
  • Adding new graphics in printouts

Version 4.0.19

  • Update of the sheet pile catalogue + modification of the details of the selected sheet pile
  • The prestress is only shown on the drawing when the prestressed element is set up
  • Kranz check adapted for a spiral mechanism (Jelinek)
  • Lu length no longer editable in the linking anchor wizard
  • Selected combination is now kept in the results window when switching from one tab to another (if possible)
  • Several corrections in the presentation of results in the printouts
  • Added part C of the English manual
  • Differentiation of the partial safety factor on soil shear parameters according to the drained/undrained behavior of each soil layer
  • Fix k0 wizard (β < 0 is no longer allowed)
  • Graphical results fixed in imperial units
  • Correction of the behavior of the assistants of the coefficients of the soil layers
  • Correction of the min and max values ​​printed under the phase graphs
  • Correction of the printing of the results summary to the ULS to conform to that presented in the interface
  • Correction of ELU results for phases where there is no action

 

 

Major update v4.0.1.3 to v4.0.11

krea_upd_v.4.0.3_to_v.4.0.11.zip

setup K-Rea v.4.0.11

  • Fixing the check of the soil level at the along the wall for berm in initial phase
  • It is again possible to print the results of the examples without saving them
  • Changing the Print Wizard to allow printing more than 1000 pages
  • Correction of display bugs on the results presentation screen (visible colons and graph scales)
  • Correction of the “Properties” button of the action of modification of the layers of grounds
  • English translation corrections

Major update v4.0.1.3 to v4.0.9

krea_upd_v.4.0.3_to_v.4.0.9.zip

setup K-Rea v.4.0.9

Version 4.0.9

  • Correction of the display of result curves for partial envelopes
  • Fixed a print bug in result tables for partial envelopes
  • Fixed a display bug when manipulating soil layers
  • Fixed phase name printing

krea_upd_v.4.0.3_to_v.4.0.8.zip

setup K-Rea v.4.0.8

Version 4.0.8

  • Parameters Miss and Mel: it is no longer allowed to enter a parameter δa negative
  • In the extrema line of to the results synthesis, Nd max is now correctly displayed
  • The title of the Shear force/ Normal Stress graphic is now updated according to the selected value.
  • The unit of study width is now noted per meter [/ m] instead of per linear meter [/ ml]
  • Correction of the display of the results curves when the 1-2 approach is chosen
  • The vertical scale of the wall drawing is now identical for both walls when there is load on the ground of one side only.
  • When the graphics are grouped, the result curves of the wall 2 are displayed with a finer thickness to differentiate them from the curves of the wall 1
  • Details of the coefficients applied for a combination are now printed when the result table for this combination is printed
  • Missing units for some result columns of results synthesis have been restored

Version 4.0.6

  • Fix printing bug

Version 4.0.5

  • Fix results export bug

Version 4.0.4

  • Changes in the presentation of the curves of results: there are no more characteristic values or design values in curves but ULS and SLS results. Characteristic curves and displacements are no longer displayed at the ULS. By default K-Réa now has ULS and SLS superimposed
  • Change presentation of envelopes results: the curves of each phase are now represented in gray scale in addition to the min and max envelopes. The tooltip system has been modified to snap on a particular curve. The tooltip now shows the name of the curve and the units. It is possible to zoom in the graph with the scroll wheel and to move by dragging and moving
  • At the opening of an old project if the earthquake is not present on both walls an earthquake action is created where it is necessary
  • Added the ability to calculate and save K-Réa results in text format
  • The envelope box is pre-checked for the last phase of the project

 

krea_upd_v.4.0.1x_to_v.4.0.4.zip

 

Version 4.0.4

  • Changes in the presentation of the curves of results: there are no more characteristic values or design values in curves but ULS and SLS results. Characteristic curves and displacements are no longer displayed at the ULS. By default K-Réa now has ULS and SLS superimposed.
  • Change presentation of envelopes results: the curves of each phase are now represented in gray scale in addition to the min and max envelopes. The tooltip system has been modified to snap on a particular curve. The tooltip now shows the name of the curve and the units. It is possible to zoom in the graph with the scroll wheel and to move by dragging and moving.
  • At the opening of an old project if the earthquake is not present on both walls an earthquake action is created where it is necessary
  • Added the ability to calculate and save K-Réa results in text format
  • The envelope box is pre-checked for the last phase of the project

Version 4.0.3

  • Update of the calculation kernel: Correction of vertical components of soil pressure to avoid divisions by 0.
  • Addition of an explicit message when the instability of the project causes the engine to produce no ULS results.
  • Correction of how negative numbers are takes into account in the formulas evaluated in the input fields.
  • Added the ability to move an action to another phase
  • It is now possible to print the results of the load combination phases
  • The “Combination” button is no longer in the wizard menu but directly on the main menu bar
  • Wizard printing no longer bugs when a page break is required in one of the tables
  • The radius of the cylindrical enclosure is now transferred at the same time as the cylindrical rigidity
  • Add keyboard shortcut CTRL + E to open an example
  • It is no longer possible to run the calculation on an example until it has been saved
  • When writing the input files of the calculation kernel the values from the wizards are rounded to the same accuracy as in the interface to have exactly the same results when you enter these values manually.

Version 4.0.2

  • Added tutorial manual in English
  • Added examples in English
  • Fixed a bug preventing the display of results when the passive pressure check is not justified.
  • Correction of the default level proposed by the shielding action when the excavation is located to the right.

Updater 4.0.1.19

  • Fix how the nature of phases is handled for the second wall of double wall projects.
  • Fix text used in printing for the result of the vertical equilibrium

Update 4.0.1.18

  • Add Conversion Level -> Depth for Projects
  • Adding help figures to checks

Update 4.0.1.17

  • Update of example files
  • Improve detection of stand alone license key

Update 4.0.1.16

  • New version of the calculation kernel
  • Adding manuals A, B, C, D (in French only)
  • Adding examples
  • The wall is shown in dotted lines in initial phase
  • Improved piles wizard
  • Improved composite wall wizard
  • Automatic Classification of sections of the screen when you change the level of a section
  • Adding a keyboard shortcut (ctrl + i) for horizontally inverting the model
  • Fixed import bug
  • Correction Unit ks for surface slab
  • Correction English translations
  • Fixed a bug preventing the removal of soil in the soil database
  • Changing logos in about form and impressions
  • Update 4.0.1.15
  • Adding deviation wizard for continuous circular walls

Update 4.0.1.15

  • Adding deviation wozard for continous circular walls

Update 4.0.1.14

  • Adding the Spanish language
  • Adding a help image to the over- excavation ( MISS action MEL)
  • Adding a help image to load combinations
  • Adding a help image to balance the vertical
  • Clarification of action Graux overload
  • Fixed unit of inertia in the wall definition wizard
  • Fixed a bug when using the IE assistant for sections greater than 1
  • Fixed behavioral bugs in the soil layers of wizard called from the embankment actions and redefinition of soil layers
  • Fixed the display bug of LEM results of the wall 2
  • It is now possible to open the K -Rea v4 project files by double-clicking by assigning them with KRea.exe as default program.

 

krea_upd_v4.0.1.x_vers_v4.0.1.7_0.zip

 

Installer K-Réa v4.0.1.7

  • Fix results of surfacique linking anchor when multiple linking anchor are activated

 

krea_upd_v4.0.1.x_versv4.0.1.4.zip

 

Version 4.0.1.4 :
UI update:

  • Realignment of menus and shortcuts in the main window
  • Fix bug affecting the representation of anchors
  • Control forcing the creation of a reduced pressure action before the sheeting installation action was reintroduced

Update of the calculation kernel.

  • Bug fix in second order calculation option

Version 4.0.1.3 :

  • Update of the calculation kernel.
  • Second order calculation option added
  • Bug fix in Kranz calculation (calculation of P2H in double-wall projects + limited active earth pressure action)

Version 4.0.1.2 :
Update of the calculation kernel

 

 

krea_maj_v4.0.1.x_versv4.0.1.1_1.zip

 

  • update of the licensing system and the impression

 

 

setup_krea_v4011.exe

 

  • It includes an upgraded version of the user-interface, which is fully compatible with the latest Windows® versions and integrates several new features.

P.S : you have have to uninstall the previous version before launching the new setup.

Please feel free to contact us for any additional information.