Close

Bruno Simon

Geotechnical expert

Joined Terrasol in 1987

Diplomas:

  • MSc Civil Engineering, Ecole Nationale des Ponts et Chaussées, 1975

Scientific community:

  • Lecturer in Soil Mechanics and Foundation at Ecole Nationale des Ponts et Chaussées
  • Member of CFMS (“Comité Français de Mécanique des Sols et de Géotechnique” / French Committee for Soil Mechanics and Geotechnical Engineering)
  • Member of CFBR (“Comité Français des Barrages et Réservoirs” / French Committee on Dams and Reservoirs)
  • Director of the Scientific and Technical Committee of the National Research Project ASIRI (2005 – 2013)
  • Chairman of the National Research Project ASIRI 2 (2019 – On-going)

Areas of study:

  • Soil reinforcement and improvement
  • Embankments on soft soils
  • Retaining structures
  • Foundations
  • Hydraulic structures and earth dams
  • Maritime works
  • Nuclear power plants.
  • Developement of geotechnical software

Publications:

  • “Glissements sous-marins fréquents au niveau de Cap Lopez au Gabon en Afrique de l’Ouest” (E. Green, B. Simon, C. Babin, KV. Nguyen) – ICSMGE, Seoul, September 2017
  • “Fondation d’un IGH en environnement contraint” (E. Cazès, A. Bergère, F. Cuira and B. Simon) – Journées Nationales de Géotechnique et Géologie de l’Ingénieur (JNGG), Nancy, July 2016
  • “Apports de l’interaction sol-structure dans la conception des fondations” (F. Cuira and B. Simon) – Journées Nationales de Géotechnique et Géologie de l’Ingénieur (JNGG), Nancy, July 2016
  • “Apports de la méthode cinématique du calcul à la rupture pour la conception des soutènements” (F. Cuira and B. Simon) – Journées Nationales de Géotechnique et Géologie de l’Ingénieur (JNGG), Nancy, July 2016
  • “Prise en compte des géogrilles dans un modèle biphasique simplifié d’un sol renforcé par inclusions rigides” (B. Simon) – XVIth ECSMGE, Edinburgh, September 2015
  • “La géotechnique pour la conception et la réalisation des dallages” (B. Simon and Luis Carpinteiro) – Journée d’information « Dallages en béton pour l’industrie », Toulon,  May 21, 2015
  • “Quelques exemples d’application du calcul à la rupture à des ouvrages géotechniques” (B. Simon) – 4ème Conférence Maghrébine de Géotechnique – Sousse, November 2014
  • “Comment un choix éclairé des paramètres géotechniques contribue à une bonne conception des ouvrages” (B. Simon) – 4ème Conférence Maghrébine de Géotechnique – Sousse, November 2014
  • “Comportement d’un réservoir enterré sous l’effet de variations de température” (F. Cuira and B. Simon) – Sousse, November 2014
  • Pile-supported embankment over soft soil for South Europe Atlantic high speed line (L. Briançon, B. Simon and G. Auray) – 10ème conférence Internationale sur les Géotextiles – Berlin, September 2014
  • “Remblai ferroviaire sur inclusions rigides” (L. Briançon, B. Simon, M. Dupraz and G. Maubert) – Travaux Magazine 907, July 2014
  • “Les fondations profondes du pont sur la lagune à Abidjan” (B. Simon, D. Michel, T. Perini and G. Kilidjian) – Travaux Magazine 907, July 2014
  • “Une mise en oeuvre pratique de l’analyse des risques en géotechnique” (E. Cazes, F. Cuira and B. Simon) – JNGG 2014 – Beauvais, July 2014
  • “Le modèle Kranz : enjeux conceptuels et considérations pratiques” (F. Cuira et B. Simon) – JNGG 2014 – Beauvais, July 2014
  • “Remblai expérimental sur inclusions rigides” (L. Briançon, B. Simon and G. Auray) – JNGG 2014 – Beauvais, July 2014
  • “Innovations Françaises en Géotechnique : les Projets Nationaux de Recherche” (F.Schlosser, C.Plumelle, R. Frank, A. Puech, H. Gonin, F. Rocher-Lacoste, B. Simon and C. Bernardini) – 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris 2013
  • “Prise en compte des effets de bord dans un massif renforcé par inclusions rigides” (F. Cuira and B. Simon) – 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris 2013
  • “Traitement antiliquéfaction sous trois réservoirs GNL à Dunkerque” (M. Lebreton, B. Simon and D. Michel) – “Travaux” Magazine n° 897, June 2013
  • Yield design applied to earth retaining structures“- Indian Geotechnical Conference, New Delhi, December 2012
  • General report S5 Rigid Inclusions and Stone Columns” – ISSMGE – TC 211 International Symposium on Ground Improvement IS-GI Brussels, May/June 2012
  • Spread foundations on rigid inclusions subjected to complex loading: Comparison of 3D numerical and simplified analytical modelling“- ISSMGE – TC 211 International Symposium on Ground Improvement IS-GI Brussels, May/June 2012
  • Performance of pile-supported embankment over soft soil: full scale experiment” (with L. Briançon) – Journal of Geotechnical Engineering, ASCE, April 2012
  • Tassements sous un IGH fondé sur radier” (with C. Lefèvre) – CIGOS-2010, Paris, November 2010
  • Pile-supported earth platforms: two approaches with physical models” (with L. Thorel, JC. Dupla, G. Rault, J. Canou, G. Baudouin and AQ Dinh) – 7th International Conference on Physical Modelling in Geotechnics, Zurich, June and July 2010
  • Full-scale experiments of pile-supported earth platform under a concrete floor slab and an embankment” (with L. Briançon) – Symposium on New Techniques for Design and Construction on Soft Clays, Brazil, May 2010
  • Une méthode simplifiée pour le calcul des semelles sur sol renforcé par inclusions rigides“, JNGG’10,  Grenoble, July 2010
  • Deux outils simples pour traiter des interactions complexes d’un massif renforcé par inclusions rigides” (with F. Cuira) – 17th International Conference on Soil Mechanics and Geotechnical Engineering, Alexandria, October 2009
  • “Yield design calculation of earth retaining structures”- Ground Engineering, September 2009
  • Projet national de recherche et développement. Amélioration des sols par inclusions verticales rigides” – “Travaux” Magazine n° 862, June 2009
  • Modélisation 3D simplifiée d’une plaque sur sol multicouche élastique” (with F. Cuira) – “Revue Française de Géotechnique” n°124, 2008
  • Yield design applied to earth retaining structures” – Konya ZM12, Turkey, October 2008
  • Enseignements des préchargements réalisés sur le site de Montoir de Bretagne depuis 1999” (with M. Clorennec) – JNGG’08 – Nantes, June 2008

Previous experience:

  • Design engineer, then project manager at Mecasol, consulting firm and laboratory in the field of soil mechanics (1976-87).